Frequency response data-based peak filter design applied to MIMO large-scale high-precision scan stage

A large-scale high-precision scan stage is important equipment in the industrial productions of micro-fabrication such as flat panel display (FPD) lithography systems. Designing controllers for multi-input multi-output (MIMO) systems is time-consuming and needs experience because of the interaction between each axis and many controller tuning parameters. The aim of this study is to develop a peak filter design method based on frequency response data to reduce repetitive disturbance. This data-based approach does not use the model and only uses the frequency response data of the controlled system and the disturbance spectrum calculated from the scanning error data (Contribution 1). The peak filter is designed by convex optimization and satisfies robust stability conditions for six-degree-of-freedom systems (Contribution 2). The control performance of the designed peak filter is experimentally demonstrated with an industrial MIMO large-scale high-precision scan stage in reducing the scanning error of the main stroke of the translation along the $x$-axis (Contribution 3).     

柴达木盆地三湖坳陷横波勘探中的低幅异常消除技术

近年来,在柴达木盆地三湖坳陷开展了横波地震勘探,但是由于该区低幅度构造发育,横波静校正引起的"低幅"异常与上述低幅度构造相互混杂,难以区分。为此,针对该区横波表层调查难以控制表层横波速度模型的变化、横波近偏移距初至污染严重、横波折射层发育导致高速界面难以确定等问题,首先采用曲线拟合技术预测污染区横波初至时间确保初至完整性,然后采用面波模型与多层折射分层联合约束反演横波表层速度,最后通过基于速度谱分析的层位匹配建模技术确定合理的横波速度界面,形成了横波表层"低幅"异常消除技术,并进行了现场应用及效果评价。研究结果表明:①曲线拟合技术可以弥补近道污染区横波初至空白,保证层析反演模型的完整性;②基于瑞雷波的频散特性反演建模可以为确定该区浅层横波速度提供可靠的资料,提高浅层模型精度;③面波模型与多层折射分层联合约束反演能够更准确的反演该区表层横波速度场,较好地建立横波速度模型,消除横波剖面上"低幅"异常现象。结论认为,所形成的横波地震勘探低幅异常消除技术消除了横波静校正引起的"低幅"异常现象,提高了横波地震资料的成像品质。     

Prebiotic Pathway from Ribose to RNA Formation

At the focus of abiotic chemical reactions is the synthesis of ribose. No satisfactory explanation was provided as to the missing link between the prebiotic synthesis of ribose and prebiotic RNA (preRNA). Hydrogen cyanide (HCN) is assumed to have been the principal precursor in the prebiotic formation of aldopentoses in the formose reaction and in the synthesis of ribose. Ribose as the best fitting aldopentose became the exclusive sugar component of RNA. The elevated yield of ribose synthesis at higher temperatures and its protection from decomposition could have driven the polymerization of the ribose-phosphate backbone and the coupling of nucleobases to the backbone. RNA could have come into being without the involvement of nucleotide precursors. The first nucleoside monophosphate is likely to have appeared upon the hydrolysis of preRNA contributed by the presence of reactive 2′-OH moieties in the preRNA chain. As a result of phosphorylation, nucleoside monophosphates became nucleoside triphosphates, substrates for the selective synthesis of genRNA.     

Multilayer thermal object identification in frequency domain using IR thermography and vector fitting

This paper deals with the identification of the thermal parameters of multilayer objects using the concept of thermal impedance. In order to perform such identification, temperature evolution in time is obtained by an infrared camera after power excitation is applied in the investigated structure. Infrared thermography offers the advantage of being a noncontact temperature detection and measurement method. In many practical cases, it is impossible to use contact temperature measurements. Typically, the power in the form of a step function is applied. In order to calculate the thermal impedance of an object, temperature and power are converted into the frequency domain using the Laplace transform for s = jω. Then, the poles of the thermal impedance are identified using vector fitting, which allows calculating the thermal impedance as a sum of partial fractions. This corresponds directly to the Foster network of a thermal object. In addition, the vector fitting method offers much better convergence in comparison with other methods using the polynomial rational approximation of thermal impedance. A considerable improvement of the numerical Laplace transform in high frequency range is proposed. In this approach, the variable s = jω is replaced by , and then, the integration result is corrected by the Taylor series. It leads to a kind of filtering of the temperature signal.     

Elitist clonal selection algorithm for optimal choice of free knots in B-spline data fitting

Data fitting with B-splines is a challenging problem in reverse engineering for CAD/CAM, virtual reality, data visualization, and many other fields. It is well-known that the fitting improves greatly if knots are considered as free variables. This leads, however, to a very difficult multimodal and multivariate continuous nonlinear optimization problem, the so-called knot adjustment problem. In this context, the present paper introduces an adapted elitist clonal selection algorithm for automatic knot adjustment of B-spline curves. Given a set of noisy data points, our method determines the number and location of knots automatically in order to obtain an extremely accurate fitting of data. In addition, our method minimizes the number of parameters required for this task. Our approach performs very well and in a fully automatic way even for the cases of underlying functions requiring identical multiple knots, such as functions with discontinuities and cusps. To evaluate its performance, it has been applied to three challenging test functions, and results have been compared with those from other alternative methods based on AIS and genetic algorithms. Our experimental results show that our proposal outperforms previous approaches in terms of accuracy and flexibility. Some other issues such as the parameter tuning, the complexity of the algorithm, and the CPU runtime are also discussed.     

基于增强算子的污染土雷达图像特征提取仿真

针对雷达图像特征提取效率低、精度不高等问题,提出一种基于增强算子的污染土雷达图像特征提取方法。首先使用多尺度非均匀滤波把含有噪声与不含噪声的像素点灰度值、构成因素及像素加权灰度密度三个特征进行划分,完成雷达图像去噪。其次提出增强算子方法,将图像数据转变至图像的空间域,以此判断污染土雷达图像内是否存在对比度不高区域和细微区域。最后采用灰色关联分析计算超像素之间的相似度,运用MLS增强算子对曲面进行拟合,通过高斯曲率与平均曲率构建出特征判断准则,提高图像特征提取完整性,实现污染土雷达图像特征的精准提取。仿真结果表明,与传统方法相比所提方法计算速度较快,雷达特征提取效率较高,可大幅提升污染土雷达图像特征提取准确率。     

平板集热器(倾角)变化工况数值模拟

运用FLUENT数值模拟软件分析了平板集热器(倾角)变化对集热器传热特性的影响,保证其结构参数不变,通过对5组不同倾角(0°、30°、45°、60°、75°)的数值模型进行非稳态模拟,对模拟数据进行分析,得出了平板集热器不同倾角对集热器传热性能变化的影响。     

基于区域特征和质心关系的两步法阀板检测

针对冲压阀板中毛刺、冲压孔堵塞等缺陷的检测问题,提出了一种基于面积特征的通孔数目检测和基于质心关系的快速模板匹配检测的两步视觉检测方案。首先采用通孔数检测初步判定零件是否存在冲压孔堵塞缺陷,之后采用模板匹配精确检测边缘毛刺缺陷。利用区域面积特征实现通孔数检测;提出了一种限定条件的最小二乘法圆拟合方法和一种基于圆心特征的快速模板匹配方法,实现边缘毛刺等缺陷的精确检测。实验结果表明,这种两步检测方案检测速度快精准度高,能够满足阀板生产线的检测要求。     

再生混凝土抗压强度试验研究

设计3种不同再生骨料取代率的再生混凝土立方体试件，分别在7 d、14 d、28 d、100 d龄期进行抗压强度试验，结果表明：长龄期再生混凝土立方体抗压强度有所增大，但高取代率比低取代率的抗压强度降低，再生混凝土后期强度增长速率高于普通混凝土。对试验室实测的再生混凝土立方体抗压强度与试验龄期进行拟合，拟合结果相关系数均大于0.97，吻合结果较好。     

基于普吕克直线的多线结构光视觉传感器标定方法

针对多线结构光系统的快速标定,提出了一种基于普吕克直线的标定方法。传统的线结构光标定方法大多以单点的形式进行提取和坐标系转换,从而获得平面方程。然而单点数量较多会导致操作复杂,不适用于多线结构光的标定。为了解决这个问题,提出了一种新的标定方法,该方法在标定过程中全部采用普吕克矩阵的形式,而不是直接使用点特征。该方法有利于在摄像机坐标系下快速准确地获得光平面方程。同时设计了一种与该方法相对应的用于标定多线结构光的平面标定靶标。为了将一般直线转换为普吕克直线,将图像平面维度延展,定义了一个新的图像空间。为了对普吕克直线的坐标系进行转换,重新表达了基于普吕克直线的透视投影模型。基于普吕克空间中直线与平面的性质,对多条结构光线的普吕克矩阵进行合并即可高效地构造出线性的矩阵方程,从而进一步拟合出结构光平面方程。实验验证了所提方法并证明了校准精度的显著提高,当测试距离为1.8 m时,测量得到的三维点的RMS误差在0.08 mm之内。